Programme

BASIC CONCEPTS FOR STRUCTURAL DESIGN
• methods and structural requirements
• structural safety
• limit states design
• actions on structures
STEEL STRUCTURES
• material
• strength, deformability and stability
• members in tension and compression
• members with flexure and axial load
• joints
REINFORCED CONCRETE STRUCTURES
• material (concrete and steel reinforcement)
• behavior under bending
• ULS for stresses due to flexure and axial load
• ULS for stresses due to shear and torsion
• SLS (crack and stress control)

Core Documentation

• Teoria e Tecnica delle Costruzioni Civili (Renato Giannini, 2011, Ed. CittàStudi)
• D.M. 17.01.2018: Aggiornamento Norme Tecniche per le Costruzioni [G.U. 20.02.2018 n. 42]
• Circolare 21.01.2019 n. 7: Istruzioni per l’applicazione dell’aggiornamento delle «Norme Tecniche per le Costruzioni» di cui al D.M. 17.01.2018 [G.U. 11.02.2019 n. 35 – S.O. n. 5]
• Dispense del corso ed esercizi svolti disponibili sul sito FTP del docente a cui possono liberamente accedere gli studenti.

Type of delivery of the course

The course is organised in theoretical lessons and design exercises, during which some basic recurring problems in professional practice are faced and solved. In the case of an extension of the health emergency from COVID-19, all the provisions that regulate the methods of carrying out the teaching activities will be implemented. In the most restrictive event, the course will take place according to the remote procedures described in the vademecum published on the student’s portal, using the Microsoft Teams software.

Attendance

It is compulsory to attend at least 75% of the lessons.

Type of evaluation

• Written examination (passing for oral admission): checking the ability to design simple steel and r.c. elements; duration 2-3 hours; the previous years examination texts are available on teacher’s FTP to which the students can freely access. • Oral examination (individual): checking the learning of the topics discussed in the course and the ability to face design problems of simple steel and r.c. elements; duration 30-45 minutes. In the event of an extension of the health emergency from COVID-19, all the provisions governing the methods for carrying out the student assessment will be implemented. In the most restrictive event, the following methods will apply. The exam consists of the oral test only according to the remote procedures described in the vademecum published on the student’s portal, using the Microsoft Teams software. In particular, the following is specified: • To take the exam test: - the candidate must book on the Gomp system (non-booked candidates are not admitted to the test): it is strongly recommended, for organizational reasons, to book if and only if you have the serious intention of taking the test; - the candidate must have sheets of paper, a pen, a calculator and a valid identification document: it is not allowed to keep anything else during the test; - the candidate must have a smartphone, with the Microsoft Teams software installed, which will be used to carry out the test in an audio-video conference and to allow the teacher the monitoring he deems most appropriate; during the test, the candidate must continuously show the teacher what he/she will write to answer the questions. The use of earphones is not allowed. It is recommended to keep the smartphone charged for the duration of the test; - it is recommended to check that the personal data on Gomp are up to date; • Convocation of candidates for the exam: - in relation to the degree of crowding, the candidates are divided, at the discretion of the teacher, into one or more "turns"; - candidates receive an email (at the address on Gomp) with an indication of the day/time of their "turn" and with a link to access it. • Opening of the exam session: - maximum punctuality is recommended; - it is recommended to access Microsoft Teams with your university credentials; - it is recommended to disable microphone and video camera; - roll-call of the candidates: the called candidate activates microphone and video camera, answers "present" and then deactivates microphone and video camera again. • Examination test: - only the candidate examined activates microphone and video camera; - identification of the candidate; - to ensure maximum transparency, the presence of at least 3 students is required for the duration of the test; - in case of incorrect behavior, the teacher proceeds with a verbal warning or with the cancellation of the test; - it is strictly forbidden for anyone to register, even only in part, the examination session and/or to distribute the recordings. • In case of malfunctions during the exam test: - if correct functioning is restored immediately, the oral test continues; - if correct functioning is not restored immediately but within the exam day, the oral exam is continued within the day, at the end of all the scheduled exams; - if the correct functioning is not restored within the exam day, the student can contact the teacher via email (tommaso.albanesi@uniroma3.it) to agree on another day for the exam; - if the correct functioning cannot be restored within the last day established for the oral tests, the student will be considered withdrawn.

Programme

BASIC CONCEPTS FOR STRUCTURAL DESIGN
• methods and structural requirements
• structural safety
• limit states design
• actions on structures
STEEL STRUCTURES
• material
• strength, deformability and stability
• members in tension and compression
• members with flexure and axial load
• joints
REINFORCED CONCRETE STRUCTURES
• material (concrete and steel reinforcement)
• behavior under bending
• ULS for stresses due to flexure and axial load
• ULS for stresses due to shear and torsion
• SLS (crack and stress control)

Core Documentation

Books (suggeted)
• Teoria e Tecnica delle Costruzioni Civili (Renato Giannini, 2011, Ed. CittàStudi)

Reference Bibliography

AICAP. Dettagli Costruttivi di Strutture in Calcestruzzo Armato, 2011. • AICAP. Costruzioni in Calcestruzzo, Costruzioni composte Acciaio-Calcestruzzo, Commentario alle Norme Tecniche per le Costruzioni D.M. 14/1/2008, 2011. • AITEC: Telai in C.A. in zona sismica - Progettazione per duttilità e per resistenza I Quaderni, pensati per costituire un efficace ausilio alla attività professionale e alla didattica, fanno parte delle varie attività editoriali pianificate dalla Commissione Strutture di AICAP. • AITEC: Guida all'uso dell'Eurocodice 2 - con riferimento alle Norme Tecniche D.M. 14.1.2008 Codes • D.M. 17.01.2018: Aggiornamento Norme Tecniche per le Costruzioni [G.U. 20.02.2018 n. 42] • Circolare 21.01.2019 n. 7: Istruzioni per l’applicazione dell’aggiornamento delle «Norme Tecniche per le Costruzioni» di cui al D.M. 17.01.2018 [G.U. 11.02.2019 n. 35 – S.O. n. 5]

Type of delivery of the course

• The course is organised in theoretical lessons and design exercises, during which some basic recurring problems in professional practice are faced and solved. In the case of an extension of the health emergency from COVID-19, all the provisions that regulate the methods of carrying out the teaching activities will be implemented. In the most restrictive event, the course will take place according to the remote procedures described in the vademecum published on the student’s portal, using the Microsoft Teams software.

Attendance

It is compulsory to attend at least 75% of the lessons.

Type of evaluation

• Written examination (passing for oral admission): checking the ability to design simple steel and r.c. elements; duration 2-3 hours; the previous years examination texts are available on teacher’s FTP to which the students can freely access. • Oral examination (individual): checking the learning of the topics discussed in the course and the ability to face design problems of simple steel and r.c. elements; duration 30-45 minutes. In the event of an extension of the health emergency from COVID-19, all the provisions governing the methods for carrying out the student assessment will be implemented. In the most restrictive event, the following methods will apply. The exam consists of the oral test only according to the remote procedures described in the vademecum published on the student’s portal, using the Microsoft Teams software. In particular, the following is specified: • To take the exam test: - the candidate must book on the Gomp system (non-booked candidates are not admitted to the test): it is strongly recommended, for organizational reasons, to book if and only if you have the serious intention of taking the test; - the candidate must have sheets of paper, a pen, a calculator and a valid identification document: it is not allowed to keep anything else during the test; - the candidate must have a smartphone, with the Microsoft Teams software installed, which he will use to carry out the test in an audio-video conference and to allow the teacher the monitoring he deems most appropriate; during the test, the candidate must continuously show the teacher what he will write to answer the questions. The use of earphones is not allowed. It is recommended to keep the smartphone charged for the duration of the test; - it is recommended to check that the personal data on Gomp are up to date; • Convocation of candidates for the exam: - in relation to the degree of crowding, the candidates are divided, at the discretion of the teacher, into one or more "turns"; - candidates receive an email (at the address on Gomp) with an indication of the day/time of their "turn" and with a link to access it. • Opening of the exam session: - maximum punctuality is recommended; - it is recommended to access Microsoft Teams with your university credentials; - it is recommended to disable microphone and video camera; - roll-call of the candidates: the called candidate activates microphone and video camera, answers "present" and then deactivates microphone and video camera again. • Examination test: - only the candidate examined activates microphone and video camera; - identification of the candidate; - to ensure maximum transparency, the presence of at least 3 students is required for the duration of the test; - in case of incorrect behavior, the teacher proceeds with a verbal warning or with the cancellation of the test; - it is strictly forbidden for anyone to register, even only in part, the examination session and/or to distribute the recordings. • In case of malfunctions during the exam test: - if correct functioning is restored immediately, the oral test continues; - if correct functioning is not restored immediately but within the exam day, the oral exam is continued within the day, at the end of all the scheduled exams; - if the correct functioning is not restored within the exam day, the student has the right to contact the teacher via email (alessandro.bergami@uniroma3.it) to agree on another day for the exam; - if the correct functioning cannot be restored within the last day established for the oral tests, the student will be considered withdrawn.

Programme

BASIC CONCEPTS FOR STRUCTURAL DESIGN
• methods and structural requirements
• structural safety
• limit states design
• actions on structures
STEEL STRUCTURES
• material
• strength, deformability and stability
• members in tension and compression
• members with flexure and axial load
• joints
REINFORCED CONCRETE STRUCTURES
• material (concrete and steel reinforcement)
• behavior under bending
• ULS for stresses due to flexure and axial load
• ULS for stresses due to shear and torsion
• SLS (crack and stress control)

Core Documentation

• Teoria e Tecnica delle Costruzioni Civili (Renato Giannini, 2011, Ed. CittàStudi)
• D.M. 17.01.2018: Aggiornamento Norme Tecniche per le Costruzioni [G.U. 20.02.2018 n. 42]
• Circolare 21.01.2019 n. 7: Istruzioni per l’applicazione dell’aggiornamento delle «Norme Tecniche per le Costruzioni» di cui al D.M. 17.01.2018 [G.U. 11.02.2019 n. 35 – S.O. n. 5]
• Lecture notes and solved exercises are available on teacher’s FTP to which the students can freely access.

Reference Bibliography

AICAP. Dettagli Costruttivi di Strutture in Calcestruzzo Armato, 2011. • AICAP. Costruzioni in Calcestruzzo, Costruzioni composte Acciaio-Calcestruzzo, Commentario alle Norme Tecniche per le Costruzioni D.M. 14/1/2008, 2011. • AITEC: Telai in C.A. in zona sismica - Progettazione per duttilità e per resistenza I Quaderni, pensati per costituire un efficace ausilio alla attività professionale e alla didattica, fanno parte delle varie attività editoriali pianificate dalla Commissione Strutture di AICAP. • AITEC: Guida all'uso dell'Eurocodice 2 - con riferimento alle Norme Tecniche D.M. 14.1.2008 Codes • D.M. 17.01.2018: Aggiornamento Norme Tecniche per le Costruzioni [G.U. 20.02.2018 n. 42] • Circolare 21.01.2019 n. 7: Istruzioni per l’applicazione dell’aggiornamento delle «Norme Tecniche per le Costruzioni» di cui al D.M. 17.01.2018 [G.U. 11.02.2019 n. 35 – S.O. n. 5]

Type of delivery of the course

The course is organised in theoretical lessons and design exercises, during which some basic recurring problems in professional practice are faced and solved. In the case of an extension of the health emergency from COVID-19, all the provisions that regulate the methods of carrying out the teaching activities will be implemented. In the most restrictive event, the course will take place according to the remote procedures described in the vademecum published on the student’s portal, using the Microsoft Teams software.

Attendance

It is compulsory to attend at least 75% of the lessons.

Type of evaluation

• Written examination (passing for oral admission): checking the ability to design simple steel and r.c. elements; duration 2-3 hours; the previous years examination texts are available on teacher’s FTP to which the students can freely access. • Oral examination (individual): checking the learning of the topics discussed in the course and the ability to face design problems of simple steel and r.c. elements; duration 30-45 minutes. In the event of an extension of the health emergency from COVID-19, all the provisions governing the methods for carrying out the student assessment will be implemented. In the most restrictive event, the following methods will apply. The exam consists of the oral test only according to the remote procedures described in the vademecum published on the student’s portal, using the Microsoft Teams software. In particular, the following is specified: • To take the exam test: - the candidate must book on the Gomp system (non-booked candidates are not admitted to the test): it is strongly recommended, for organizational reasons, to book if and only if you have the serious intention of taking the test; - the candidate must have sheets of paper, a pen, a calculator and a valid identification document: it is not allowed to keep anything else during the test; - the candidate must have a smartphone, with the Microsoft Teams software installed, which will be used to carry out the test in an audio-video conference and to allow the teacher the monitoring he deems most appropriate; during the test, the candidate must continuously show the teacher what he/she will write to answer the questions. The use of earphones is not allowed. It is recommended to keep the smartphone charged for the duration of the test; - it is recommended to check that the personal data on Gomp are up to date; • Convocation of candidates for the exam: - in relation to the degree of crowding, the candidates are divided, at the discretion of the teacher, into one or more "turns"; - candidates receive an email (at the address on Gomp) with an indication of the day/time of their "turn" and with a link to access it. • Opening of the exam session: - maximum punctuality is recommended; - it is recommended to access Microsoft Teams with your university credentials; - it is recommended to disable microphone and video camera; - roll-call of the candidates: the called candidate activates microphone and video camera, answers "present" and then deactivates microphone and video camera again. • Examination test: - only the candidate examined activates microphone and video camera; - identification of the candidate; - to ensure maximum transparency, the presence of at least 3 students is required for the duration of the test; - in case of incorrect behavior, the teacher proceeds with a verbal warning or with the cancellation of the test; - it is strictly forbidden for anyone to register, even only in part, the examination session and/or to distribute the recordings. • In case of malfunctions during the exam test: - if correct functioning is restored immediately, the oral test continues; - if correct functioning is not restored immediately but within the exam day, the oral exam is continued within the day, at the end of all the scheduled exams; - if the correct functioning is not restored within the exam day, the student can contact the teacher via email (tommaso.albanesi@uniroma3.it) to agree on another day for the exam; - if the correct functioning cannot be restored within the last day established for the oral tests, the student will be considered withdrawn.