Home » Persone »

Prof. MASSIMILIANO BARLETTA

Contributo in Rivista

• Energy absorption of PLA-based metamaterials manufactured by material extrusion: dynamic loads and shape recovery, BARLETTA, MASSIMILIANO, , 2024Link identifier #identifier_person_6121-1 Dettaglio
• Extrusion and thermoforming of poly(butylene succinate–co‐butylene adipate)/poly(3–hydroxybutyrate–co–3–hydroxyhexanoate) bio‐based blends for the fabrication of disposable packaging, GENOVESI, ANNALISA; KOCA, NAZAN; BARLETTA, MASSIMILIANO; AVERSA, CLIZIA, , 2024Link identifier #identifier_person_114770-2 Dettaglio
• Life Cycle Assessment (LCA) of ceramic sanitaryware: focus on the production process and analysis of scenario, BARLETTA, MASSIMILIANO, , 2024Link identifier #identifier_person_32287-3 Dettaglio
• Life cycle assessment of secondary packaging: Expanded polystyrene versus bioplastic-coated corrugated cardboard, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2024Link identifier #identifier_person_48190-4 Dettaglio
• Blown film extrusion of poly(lactic)acid/poly(3-hydroxybutyrate-4-hydroxybutyrate) blends for improved toughness and processability, KOCA, NAZAN; AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2023Link identifier #identifier_person_61122-5 Dettaglio
• Energy absorbing 4D printed meta-sandwich structures: load cycles and shape recovery, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2023Link identifier #identifier_person_193631-6 Dettaglio
• Evaluation of wave configurations in corrugated boards by experimental analysis (EA) and finite element modeling (FEM): the role of the micro-wave in packaging design, BARLETTA, MASSIMILIANO, , 2023Link identifier #identifier_person_88407-7 Dettaglio
• Polyhydroxyalkanoates-based Cast Film as Bio-based Packaging for Fresh Fruit and Vegetables: Manufacturing and Characterization, GENOVESI, ANNALISA; AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2023Link identifier #identifier_person_59047-8 Dettaglio
• Processing PLA/P(3HB)(4HB) blends for the manufacture of highly transparent, gas barrier and fully bio-based films for compostable packaging applications, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; KOCA, NAZAN, , 2023Link identifier #identifier_person_143461-9 Dettaglio
• Progress in design and processing of polyhydroxyalkanoates (PHAs): Home compostable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx)/polybutylene succinate-co-adipate (PBSA) blend, CAPPIELLO, GIULIA; AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2023Link identifier #identifier_person_26574-10 Dettaglio
• Recycling of poly(lactic acid)/poly(butylene succinate) (PLA/PBS) blends with high amounts of secondary raw material, KOCA, NAZAN; AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2023Link identifier #identifier_person_149274-11 Dettaglio
• Role of wood flour on processability of marine biodegradable poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH)/poly(butylene succinate-co-butylene adipate) (PBSA) blends in cast extrusion and thermoforming of take-away food containers, GENOVESI, ANNALISA; AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; CAPPIELLO, GIULIA; LIGNOLA, CHIARA, , 2023Link identifier #identifier_person_88068-12 Dettaglio
• Addition of thermoplastic starch (TPS) to binary blends of poly(lactic acid) (PLA) with poly(butylene adipate-coterephthalate) (PBAT): extrusion compounding, cast extrusion and thermoforming of home compostable materials, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA, , 2022Link identifier #identifier_person_26274-13 Dettaglio
• Comparative life cycle analysis of disposable and reusable tableware: The role of bioplastics, GENOVESI, ANNALISA; AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; CAPPIELLO, GIULIA, , 2022Link identifier #identifier_person_64797-14 Dettaglio
• Compatibilization strategies and analysis of morphological features of poly(butylene adipate-co-terephthalate) (PBAT)/poly(lactic acid) PLA blends: A state-of-art review, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; CAPPIELLO, GIULIA, , 2022Link identifier #identifier_person_1561-15 Dettaglio
• Functional Behavior and Energy Absorption Characteristics of Additively Manufactured Smart Sandwich Structures, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2022Link identifier #identifier_person_112856-16 Dettaglio
• Injection‐stretch blow molding of poly (lactic acid)/polybutylene succinate blends for the manufacturing of bottles, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; VESCO, SILVIA, , 2022Link identifier #identifier_person_73155-17 Dettaglio
• Laser polishing: a review of a constantly growing technology in the surface finishing of components made by additive manufacturing, BARLETTA, MASSIMILIANO, , 2022Link identifier #identifier_person_41954-18 Dettaglio
• Laser transmission welding of aluminum film coated with heat sealable co-polyester resin with polypropylene films for applications in food and drug packaging, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2022Link identifier #identifier_person_161332-19 Dettaglio
• Life cycle assessment (LCA) of bio-based packaging solutions for extended shelf-life (ESL) milk, CAPPIELLO, GIULIA; AVERSA, CLIZIA; GENOVESI, ANNALISA; BARLETTA, MASSIMILIANO, , 2022Link identifier #identifier_person_173699-20 Dettaglio
• Life cycle assessment (LCA) of PET and PLA bottles for the packaging of fresh pasteurised milk: The role of the manufacturing process and the disposal scenario, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2022Link identifier #identifier_person_114353-21 Dettaglio
• Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH): Synthesis, properties, and applications - A review, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2022Link identifier #identifier_person_174207-22 Dettaglio
• Poly(butylene succinate) (PBS): Materials, processing, and industrial applications, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; MEHRPOUYA, MEHRSHAD, , 2022Link identifier #identifier_person_50489-23 Dettaglio
• Siloxane coating with epoxy modification: optimization of adhesion to improve steel corrosion protection, BARLETTA, MASSIMILIANO; PIZZI, ELISA, , 2022Link identifier #identifier_person_52264-24 Dettaglio
• 4D printing of shape memory polylactic acid (PLA) components: Investigating the role of the operational parameters in fused deposition modelling (FDM), BARLETTA, MASSIMILIANO; MEHRPOUYA, MEHRSHAD, , 2021Link identifier #identifier_person_134735-25 Dettaglio
• Additive manufacturing of polyhydroxyalkanoates (PHAs) biopolymers: Materials, printing techniques, and applications, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2021Link identifier #identifier_person_78946-26 Dettaglio
• Comparative investigation of scratch resistance and tribological performance of Ni–B–TiO2 composite coatings prepared by conventional and novel processing methods, VESCO, SILVIA; BARLETTA, MASSIMILIANO, , 2021Link identifier #identifier_person_107586-27 Dettaglio
• Corotating twin‐screw extrusion of poly(lactic acid) PLA /poly(butylene succinate) PBS / micro‐lamellar talc blends for extrusion blow molding of biobased bottles for alcoholic beverages, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; PIZZI, ELISA; VESCO, SILVIA, , 2021Link identifier #identifier_person_25752-28 Dettaglio
• Design, manufacturing and preliminary assessment of the suitability of bioplastic bottles for wine packaging, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; PIZZI, ELISA; PRATI, RICCARDO; VESCO, SILVIA, , 2021Link identifier #identifier_person_11377-29 Dettaglio
• Effect of filler content on scratch behavior and tribological performance of polyester/graphene oxide nanocomposite coating, GAFSI, NEDIA; BARLETTA, MASSIMILIANO, , 2021Link identifier #identifier_person_132790-30 Dettaglio
• Laser joining of aluminum film coated with vinylic resin and plastic/bioplastic films for applications in food packaging, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, , 2021Link identifier #identifier_person_103612-31 Dettaglio
• Laser sealing of compostable packaging solutions: Experimental approach and adhesion mechanisms, BARLETTA, MASSIMILIANO, , 2021Link identifier #identifier_person_54803-32 Dettaglio
• Laser sealing of PLA-based compostable coffee capsules, BARLETTA, MASSIMILIANO, , 2021Link identifier #identifier_person_155238-33 Dettaglio
• Print base decorative paper with high-dimensional stability by chemical fiber modification: An experimental and analytical approach, BARLETTA, MASSIMILIANO, , 2021Link identifier #identifier_person_157361-34 Dettaglio
• Cast extrusion of low gas permeability bioplastic sheets in PLA/PBS and PLA/PHB binary blends, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2020Link identifier #identifier_person_136695-35 Dettaglio
• Investigation on shape recovery of 3D printed honeycomb sandwich structure, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2020Link identifier #identifier_person_51988-36 Dettaglio
• Investigation on the functionality of laser-welded NiTi to NiTiCu shape memory wires, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2020Link identifier #identifier_person_51843-37 Dettaglio
• Manufacturing of cellulose-based paper: dynamic water absorption before and after fiber modifications with hydrophobic agents, BARLETTA, MASSIMILIANO, , 2020Link identifier #identifier_person_142396-38 Dettaglio
• Optimizing crystallinity of engineered poly(lactic acid)/poly(butylene succinate) blends: The role of single and multiple nucleating agents, BARLETTA, MASSIMILIANO; PIZZI, ELISA, , 2020Link identifier #identifier_person_99369-39 Dettaglio
• Prediction model for determining the optimum operational parameters in laser forming of fiber-reinforced composites, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2020Link identifier #identifier_person_76963-40 Dettaglio
• Recycling of PLA-based bioplastics: The role of chain-extenders in twin-screw extrusion compounding and cast extrusion of sheets, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PUOPOLO, MICHELA, , 2020Link identifier #identifier_person_106585-41 Dettaglio
• The effects of TiO2 sol concentration on single- and multiple-scratch damage in electroplated Ni–B-TiO2 sol composite coating, BARLETTA, MASSIMILIANO, , 2020Link identifier #identifier_person_169894-42 Dettaglio
• Thermoforming of compostable PLA/PBS blends reinforced with highly hygroscopic calcium carbonate, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2020Link identifier #identifier_person_111210-43 Dettaglio
• Ultra-flexible PLA-based blends for the manufacturing of biodegradable tamper-evident screw caps by injection molding, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2020Link identifier #identifier_person_1409-44 Dettaglio
• Advance on processing of compostable and thermally stable biodegradable polyester blends, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PIZZI, ELISA; PUOPOLO, MICHELA, , 2019Link identifier #identifier_person_169440-45 Dettaglio
• Advances in design and manufacturing of environmentally friendly and biocide-free antifouling/foul-release coatings: replacement of fluorinate species, AVERSA, CLIZIA; PUOPOLO, MICHELA; BARLETTA, MASSIMILIANO, , 2019Link identifier #identifier_person_134516-46 Dettaglio
• An artificial neural network model for laser transmission welding of biodegradable polyethylene terephthalate/polyethylene vinyl acetate (PET/PEVA) blends, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2019Link identifier #identifier_person_39422-47 Dettaglio
• Dissimilar Laser Welding of NiTi Wires, MEHRPOUYA, MEHRSHAD; BARLETTA, MASSIMILIANO, , 2019Link identifier #identifier_person_150844-48 Dettaglio
• Effect of micro-lamellar talc on dimensional accuracy and stability in injection molding of PLA/PBSA blends, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PUOPOLO, MICHELA; DONNINELLI, ALESSANDRO, , 2019Link identifier #identifier_person_133837-49 Dettaglio
• Effect of welding parameters on functionality of dissimilar laser-welded NiTi superelastic (SE) to shape memory effect (SME) wires, PUOPOLO, MICHELA; BARLETTA, MASSIMILIANO, , 2019Link identifier #identifier_person_65980-50 Dettaglio
• Engineered poly(lactic acid)-talc biocomposites for melt processing: Effects of co-blending with poly(butylene succinate) and poly(butylene terephthalate) on thermal and mechanical behavior, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PIZZI, ELISA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2019Link identifier #identifier_person_40469-51 Dettaglio
• Extrusion blow molding of environmentally friendly bottles in biodegradable polyesters blends, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2019Link identifier #identifier_person_168649-52 Dettaglio
• Thermo-Mechanical Properties of Injection Molded Components Manufactured by Engineered Biodegradable Blends, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2019Link identifier #identifier_person_172352-53 Dettaglio
• Welding strength of dissimilar laser-welded NiTi and NiTiCu shape memory wires, BARLETTA, MASSIMILIANO, , 2019Link identifier #identifier_person_195811-54 Dettaglio
• Design, development and first validation of “biocide-free” anti-fouling coatings, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PIZZI, ELISA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2018Link identifier #identifier_person_191777-55 Dettaglio
• Design, manufacturing and testing of anti-fouling/foul-release (AF/FR) amphiphilic coatings, BARLETTA, MASSIMILIANO; AVERSA, CLIZIA; PIZZI, ELISA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2018Link identifier #identifier_person_79679-56 Dettaglio
• Heat treatment of AA 6082 T6 aluminum alloy coated with thin Al2O3 layer by fluidized bed, BARLETTA, MASSIMILIANO, , 2018Link identifier #identifier_person_27622-57 Dettaglio
• Improvements in mechanical strength and thermal stability of injection and compression molded components based on Poly Lactic Acids, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; PIZZI, ELISA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2018Link identifier #identifier_person_35406-58 Dettaglio
• Laser forming of glass laminate aluminium reinforced epoxy (GLARE): On the role of mechanical, physical and chemical interactions in the multi-layers material, BARLETTA, MASSIMILIANO, , 2018Link identifier #identifier_person_4344-59 Dettaglio
• Thermal behavior of injection- and compression-molded custom-built polylactic acids, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2018Link identifier #identifier_person_89295-60 Dettaglio
• Design and manufacture of degradable polymers: Biocomposites of micro-lamellar talc and poly(lactic acid), BARLETTA, MASSIMILIANO; PIZZI, ELISA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2017Link identifier #identifier_person_59208-61 Dettaglio
• Engineering of Poly Lactic Acids (PLAs) for melt processing: Material structure and thermal properties, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2017Link identifier #identifier_person_119195-62 Dettaglio
• High Power Diode Laser (HPDL) surface hardening of low carbon steel: Fatigue life improvement analysis, GUARINO, STEFANO; BARLETTA, MASSIMILIANO, , 2017Link identifier #identifier_person_33760-63 Dettaglio
• High-Density Polyethylene/SrAl2O4:Eu2+, Dy3+ Photoluminescent Pigments: Material Design, Melt Processing, and Characterization, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2017Link identifier #identifier_person_148156-64 Dettaglio
• Laser transmission welding of poly(ethylene terephthalate) and biodegradable poly(ethylene terephthalate) – Based blends, BARLETTA, MASSIMILIANO, , 2017Link identifier #identifier_person_122819-65 Dettaglio
• Laser-assisted bending of Titanium Grade-2 sheets: Experimental analysis and numerical simulation, BARLETTA, MASSIMILIANO, , 2017Link identifier #identifier_person_97677-66 Dettaglio
• Thermal behavior of extruded and injection-molded poly(lactic acid)-talc engineered biocomposites: Effects of material design, thermal history, and shear stresses during melt processing, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2017Link identifier #identifier_person_167984-67 Dettaglio
• Wear resistance of injection moulded PLA-talc engineered bio-composites: Effect of material design, thermal history and shear stresses during melt processing, AVERSA, CLIZIA; BARLETTA, MASSIMILIANO; PIZZI, ELISA; PUOPOLO, MICHELA; VESCO, SILVIA, , 2017Link identifier #identifier_person_124613-68 Dettaglio
• Abrasive Fluidized Bed (AFB) finishing of AlSi10Mg substrates manufactured by Direct Metal Laser Sintering (DMLS), BARLETTA, MASSIMILIANO, , 2016Link identifier #identifier_person_112453-69 Dettaglio
• Engineering and Processing of Poly(HydroxyButyrate) (PHB) Modified by Nano-sized Graphene Nanoplatelets (GNP) and Amino-Functionalized Silica (A-fnSiO2), BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2016Link identifier #identifier_person_90397-70 Dettaglio
• Graphene reinforced UV-curable epoxy resins: Design, manufacture and material performance, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2016Link identifier #identifier_person_23279-71 Dettaglio
• Graphene-modified poly(lactic acid) for packaging: Material formulation, processing and performance, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2016Link identifier #identifier_person_96791-72 Dettaglio
• Hard transparent coatings on thermoplastic polycarbonate, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2016Link identifier #identifier_person_137093-73 Dettaglio
• Improvements in springback control by external force laser-assisted sheet bending of titanium and aluminum alloys, BARLETTA, MASSIMILIANO, , 2016Link identifier #identifier_person_89817-74 Dettaglio
• LaserOrigami (LO) of three-dimensional (3D) components: Experimental analysis and numerical modelling, BARLETTA, MASSIMILIANO, , 2016Link identifier #identifier_person_39925-75 Dettaglio
• Manufacturing and characterization of polyether ether ketone/methyl phenyl polysiloxane composite coatings, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA; VESCO, SILVIA, , 2016Link identifier #identifier_person_5735-76 Dettaglio
• Smart coatings on thermoplastic polycarbonates: LEGO-Design (LD) for facile manufacturability, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2016Link identifier #identifier_person_99434-77 Dettaglio
• Design and manufacturing of protective barriers on Fe 430 B substrates by phenyl methyl polysiloxane coatings: micromechanical response, chemical inertness, and corrosion resistance, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2015Link identifier #identifier_person_89165-78 Dettaglio
• Experimental investigation and modeling of fluidized bed assisted drag finishing according to the theory of localization of plastic deformation and energy absorption, BARLETTA, MASSIMILIANO, , 2015Link identifier #identifier_person_12883-79 Dettaglio
• External force-assisted LaserOrigami (LO) bending: Shaping of 3D cubes and edge design of stainless steel chairs, BARLETTA, MASSIMILIANO, , 2015Link identifier #identifier_person_180216-80 Dettaglio
• High performance composite coatings on plastics: UV-curable cycloaliphatic epoxy resins reinforced by graphene or graphene derivatives, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2015Link identifier #identifier_person_138835-81 Dettaglio
• Laser-Assisted Bending of Sharp Angles With Small Fillet Radius on Stainless Steel Sheets: Analysis of Experimental Set-Up and Processing Parameters, BARLETTA, MASSIMILIANO, , 2015Link identifier #identifier_person_132442-82 Dettaglio
• Progress in Tridimensional (3d) Laser Forming of Stainless Steel Sheets, BARLETTA, MASSIMILIANO, , 2015Link identifier #identifier_person_147571-83 Dettaglio
• Scratch- and wear-resistant photoluminescent silicone epoxy coatings on floor tiles, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2015Link identifier #identifier_person_189325-84 Dettaglio
• Scratch resistance and tribological performance of thermosetting composite powder coatings system: A comparative evaluation, BARLETTA, MASSIMILIANO, , 2015Link identifier #identifier_person_50658-85 Dettaglio
• Scratch, wear and corrosion resistant organic inorganic hybrid materials for metals protection and barrier, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2015Link identifier #identifier_person_64379-86 Dettaglio
• A comparative evaluation of fluidized bed assisted drag finishing and centrifugal disk dry finishing, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_44766-87 Dettaglio
• A comparative investigation of the tribological behavior and scratch response of polyester powder coatings filled with different solid lubricants, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_126902-88 Dettaglio
• Coating of glass and polycarbonate with aqueous two-component polyurethane resin, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_111748-89 Dettaglio
• Design and manufacture of photoluminescent coatings on stainless steel substrates, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_110157-90 Dettaglio
• Design, processing and characterization of flexible hybrid coatings: A comparative evaluation, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_87483-91 Dettaglio
• Drag finishing of sensitive workpieces with fluidized abrasives, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_147544-92 Dettaglio
• Environmentally friendly wooden-based coatings for thermal insulation: Design, manufacturing and performances, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_133802-93 Dettaglio
• Experimental evaluation of plowing and scratch hardness of aqueous two-component polyurethane (2K-PUR) coatings on glass and polycarbonate, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_43923-94 Dettaglio
• Functionalized polysiloxane coatings on hot-rolled and high-strength Fe 430 B steel: Analysis of mechanical response and resistance to chemicals, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2014Link identifier #identifier_person_87077-95 Dettaglio
• Modelling the Electrostatic Fluidised Bed (EFB) coating process using Support Vector Machines (SVMs), BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_64295-96 Dettaglio
• Retrofitting of solar glasses by protective anti-soiling and -graffiti coatings, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2014Link identifier #identifier_person_74930-97 Dettaglio
• Self-cleaning and self-sanitizing coatings on plastic fabrics: Design, manufacture and performance, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_37715-98 Dettaglio
• Wood-reinforced polyphthalamide resins: Multifunctional composite coating for metal substrates, BARLETTA, MASSIMILIANO, , 2014Link identifier #identifier_person_84976-99 Dettaglio
• Abrasive Fluidized Bed (AFB) finishing of thermally sprayed cobalt-chromium coatings, BARLETTA, MASSIMILIANO, , 2013Link identifier #identifier_person_133686-100 Dettaglio
• Application and drying at ambient temperature of thick organic-inorganic hybrid coatings on glass, BARLETTA, MASSIMILIANO; PUOPOLO, MICHELA, , 2013Link identifier #identifier_person_190216-101 Dettaglio
• Hard polyurethane coatings on compliant polycarbonate: An application of the 3D deformation response model to scratch visibility, BARLETTA, MASSIMILIANO, , 2013Link identifier #identifier_person_166629-102 Dettaglio
• New ways to the manufacturing of pigmented multi-layer protective coatings, BARLETTA, MASSIMILIANO, , 2013Link identifier #identifier_person_125851-103 Dettaglio
• Progressive and constant load scratch testing of single- and multi-layered composite coatings, BARLETTA, MASSIMILIANO, , 2013Link identifier #identifier_person_104592-104 Dettaglio
• The mechanisms of material removal in the fluidized bed machining of polyvinyl chloride substrates, BARLETTA, MASSIMILIANO, , 2013Link identifier #identifier_person_163178-105 Dettaglio
• Visual appearance and scratch resistance of high performance thermoset and thermoplastic powder coatings, BARLETTA, MASSIMILIANO, , 2013Link identifier #identifier_person_59210-106 Dettaglio
• Wear response and mechanical behaviour of silicone-based photoluminescent coatings, BARLETTA, MASSIMILIANO, , 2013Link identifier #identifier_person_51418-107 Dettaglio
• Chemical vapor deposition of highly adherent diamond coatings onto co-cemented tungsten carbides irradiated by high power diode laser, BARLETTA, MASSIMILIANO, , 2012Link identifier #identifier_person_36963-108 Dettaglio
• Effect of the substrate and interface on micro-scratch deformation of epoxy-polyester powder coatings, BARLETTA, MASSIMILIANO, , 2012Link identifier #identifier_person_56754-109 Dettaglio
• Laser surface modification (LSM) of thermally-sprayed Diamalloy 2002 coating, BARLETTA, MASSIMILIANO, , 2012Link identifier #identifier_person_148922-110 Dettaglio
• Manufacturing of steel foams by Slip Reaction Foam Sintering (SRFS), BARLETTA, MASSIMILIANO, , 2012Link identifier #identifier_person_13680-111 Dettaglio
• Recent advances in the deposition of diamond coatings on co-cemented tungsten carbides, BARLETTA, MASSIMILIANO, , 2012Link identifier #identifier_person_124164-112 Dettaglio
• Surface reconstruction of porous substrates in sintered bronze by cw-high power diode laser, BARLETTA, MASSIMILIANO, , 2012Link identifier #identifier_person_168970-113 Dettaglio
• Adhesion and wear resistance of CVD diamond coatings on laser treated WC-Co substrates, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_173126-114 Dettaglio
• Co removal and phase transformations during high power diode laser irradiation of cemented carbide, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_128891-115 Dettaglio
• Dry sliding wear response of some industrial powder coatings, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_131819-116 Dettaglio
• Effects of IR pre-curing conditions on wear resistance of metal flake powder coatings, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_4970-117 Dettaglio
• Flash IR pre-curing of the decorative layer in metal-flake powder coatings, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_22722-118 Dettaglio
• Improvement of the fatigue behavior of stainless steel substrates by low pressure fluidized bed peening (FBP), BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_149813-119 Dettaglio
• Manufacture and characterization of free-standing epoxy-polyester films, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_86939-120 Dettaglio
• Scratch response of high-performance thermoset and thermoplastic powders deposited by the electrostatic spray and 'hot dipping' fluidised bed coating methods: The role of the contact condition, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_40763-121 Dettaglio
• Springback control in sheet metal bending by laser-assisted bending: Experimental analysis, empirical and neural network modelling, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_42757-122 Dettaglio
• The role of the substrate in micro-scale scratching of epoxy-polyester films, BARLETTA, MASSIMILIANO, , 2011Link identifier #identifier_person_57404-123 Dettaglio
• Al2O3 graded coatings on aluminum alloy deposited by the fluidized bed (FB) technique: film formation and mechanical performance, BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_12522-124 Dettaglio
• HF-CVD of diamond coatings onto Fluidized Bed (FB) treated CrN interlayers, BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_175600-125 Dettaglio
• High speed finishing of a CuZn15 brass alloy by Abrasive Recirculating Fluidized Bed (ARFB), BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_56878-126 Dettaglio
• Scratch and wear resistance of transparent topcoats on carbon laminates, BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_87439-127 Dettaglio
• Scratch resistance of 'fast-cured' metal flake powder coatings, BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_197983-128 Dettaglio
• Surface modification of AlAl2O3 composites by laser treatment, BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_81398-129 Dettaglio
• Wear and corrosion behavior of HVOF-sprayed WC-CoCr coatings on Al alloys, BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_137357-130 Dettaglio
• Wear resistance of nano- and micro-crystalline diamond coatings onto WC-Co with Cr/CrN interlayers, BARLETTA, MASSIMILIANO, , 2010Link identifier #identifier_person_44209-131 Dettaglio
• Combined use of scratch tests and CLA profilometry to characterize polyester powder coatings, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_51430-132 Dettaglio
• Electrostatic spray painting of carbon fibre-reinforced epoxy composites, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_161828-133 Dettaglio
• HVOF-sprayed WC-CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_9324-134 Dettaglio
• Hybrid forming process of AA 6108 T4 thin sheets: Modelling by neural network solutions, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_25313-135 Dettaglio
• Influence of scratch load and speed in scratch tests of bilayer powder coatings, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_176649-136 Dettaglio
• On the interaction mechanisms between a high-power diode laser source and silver alloys: The case of aesthetic welding, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_130773-137 Dettaglio
• On the use of Fluidised Bed Coating (FBC) to deposit thin Al 2O 3 films onto metal substrates, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_3900-138 Dettaglio
• Post-deposition laser treatment of plasma sprayed titania-hydroxyapatite functionally graded coatings, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_122759-139 Dettaglio
• Production of open cell aluminum foams by using the dissolution and sintering process (DSP), BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_76140-140 Dettaglio
• Progress in abrasive fluidized bed machining, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_154385-141 Dettaglio
• Wear and corrosion behaviour of HVOF-sprayed WC-CoCr coatings on Al alloys, BARLETTA, MASSIMILIANO, , 2009Link identifier #identifier_person_48076-142 Dettaglio
• An application of a high power diode laser to remove oxides on AISI 316L stainless steel, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_95674-143 Dettaglio
• Characterization of laser treated steels using instrumented indentation by cylindrical flat punch, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_171603-144 Dettaglio
• Corrosion resistant alumina coatings by Fluidized Bed process [Rivestimenti anti-corrosivi di allumina depositati mediante letto fluido], BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_158327-145 Dettaglio
• Fast regime fluidized bed machining (FR-FBM) of thermally sprayed coatings, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_132865-146 Dettaglio
• Fast Regime-Fluidized Bed Machining (FR-FBM) of Atmospheric Plasma Spraying (APS) TiO2 coatings, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_186324-147 Dettaglio
• Fluidized bed coating of metal substrates by using high performance thermoplastic powders: Statistical approach and neural network modelling, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_62576-148 Dettaglio
• Heat treatment effects on the corrosion resistance of some HVOF-sprayed metal alloy coatings, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_64038-149 Dettaglio
• HVOF-sprayed WC-Co as hard interlayer for DLC films, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_106466-150 Dettaglio
• Mechanical strength and wear resistance of protective coatings applied by fluidized bed (FB), BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_140235-151 Dettaglio
• Modelling of Fluidized Bed Degreasing (FBD) process by ANNs, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_42722-152 Dettaglio
• On the combined use of scratch tests and CLA profilometry for the characterization of polyester powder coatings: Influence of scratch load and speed, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_195113-153 Dettaglio
• On the use of CrN/Cr and CrN interlayers in hot filament chemical vapour deposition (HF-CVD) of diamond films onto WC-Co substrates, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_51684-154 Dettaglio
• Raman and photoluminescence study of hot filament CVD diamond films grown on WC-Co substrates, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_142085-155 Dettaglio
• Residual stresses in HVOF-sprayed ceramic coatings, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_144619-156 Dettaglio
• Surface appearance and mechanical strength of multi-layer polymeric films, BARLETTA, MASSIMILIANO, , 2008Link identifier #identifier_person_72152-157 Dettaglio
• Development of matte finishes in electrostatic (EFB) and conventional hot dipping (CHDFB) fluidized bed coating process, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_174372-158 Dettaglio
• Epoxy-based thermosetting powder coatings: Surface appearance, scratch adhesion and wear resistance, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_90032-159 Dettaglio
• Fluidized bed assisted abrasive jet machining (FB-AJM): Precision internal finishing of Inconel 718 components, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_73322-160 Dettaglio
• Metal foams for structural applications: Design and manufacturing, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_145126-161 Dettaglio
• Microstructural and tribological characterisation of as sprayed and heat treated HVOF deposited Ni alloys, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_33825-162 Dettaglio
• Microstructural and tribological comparison of HVOF-sprayed and post-treated M-Mo-Cr-Si (M = Co, Ni) alloy coatings, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_56819-163 Dettaglio
• Modelling of electrostatic fluidized bed (EFB) coating process using artificial neural networks, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_70498-164 Dettaglio
• Progress in fluidized bed assisted abrasive jet machining (FB-AJM): Internal polishing of aluminium tubes, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_80049-165 Dettaglio
• Recovering recyclable materials: Experimental analysis of CD-R laser processing, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_110010-166 Dettaglio
• Surface preparation and coating of metal coils by using a fully integrated manufacturing system, BARLETTA, MASSIMILIANO, , 2007Link identifier #identifier_person_55709-167 Dettaglio
• A new technology in surface finishing: Fluidized bed machining (FBM) of aluminium alloys, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_52599-168 Dettaglio
• Advance in fluidized bed coating: An experimental investigation on a performance polymer coating alloy, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_191031-169 Dettaglio
• Advance in paint stripping from aluminium substrates, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_81501-170 Dettaglio
• Al2O3 thin coating of AA 6082 T6 components using a fast regime fluidized bed, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_143002-171 Dettaglio
• An application of neural network solutions to laser assisted paint stripping process of hybrid epoxy-polyester coatings on aluminum substrates, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_187893-172 Dettaglio
• Application of instrumented micro-indentations to 'in situ' mechanical characterization of wooden structures: Part I-Analysis of highly selected and decayed pinewood samples, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_23094-173 Dettaglio
• Application of instrumented micro-indentations to 'in situ' mechanical characterization of wooden structures: Part II-Analysis of different species, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_122705-174 Dettaglio
• Development of an abrasive jet machining system assisted by two fluidized beds for internal polishing of circular tubes, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_34443-175 Dettaglio
• Development of smooth finishes in electrostatic fluidized bed (EFB) coating process of high-performance thermoplastic powders (PPA 571 H), BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_140971-176 Dettaglio
• Electrostatic fluidized bed (EFB) coating of heat sensitive and electrical insulating substrates with low-curing thermoset epoxy-polyester (EP) powders, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_126043-177 Dettaglio
• Electrostatic fluidized bed deposition of a high performance polymeric powder on metallic substrates, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_134763-178 Dettaglio
• Electrostatic spray deposition (ESD) of polymeric powders on thermoplastic (PA66) substrate, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_198396-179 Dettaglio
• Electrostatic spray deposition (ESD) of 'self organizing' TiO 2-epoxy powder paints: Experimental analysis and numerical modeling, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_28962-180 Dettaglio
• Fluidized bed micro-machining and HFCVD of diamond films onto Co-cemented tungsten carbide (WC-Co) hardmetal slabs, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_174614-181 Dettaglio
• Hot filament chemical vapour deposition and wear resistance of diamond films on WC-Co substrates coated using PVD-arc deposition technique, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_122251-182 Dettaglio
• Influence of process parameters in electrostatic fluidized bed coating, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_105459-183 Dettaglio
• Line bending of Al2O3 coated and uncoated aluminium thin sheets, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_77100-184 Dettaglio
• Local mechanical and morphological characterization of friction stir-welded butt joints, BARLETTA, MASSIMILIANO, , 2006Link identifier #identifier_person_98495-185 Dettaglio
• A FEM model of conventional hot dipping coating process by using a fluidized bed, BARLETTA, MASSIMILIANO, , 2005Link identifier #identifier_person_49352-186 Dettaglio

Libro

• Link identifier #identifier_person_38717-187Dettaglio

Contributo in volume e atti di convegno

• CAPPIELLO, GIULIA; AVERSA, CLIZIA; BARLETTA, MASSIMILIANO, Design of compostable materials for the manufacturing of flexible tampon applicators, issn 2212-8271, vol. 110, pp. 344 349, 2022 Link identifier #identifier_person_99178-188Dettaglio
• AVERSA, CLIZIA; CAPPIELLO, GIULIA; BARLETTA, MASSIMILIANO, Study of binary PLA/PBSA and ternary blends PLA/PCL/PBSA for the manufacturing of single dose strips, issn 2212-8271, vol. 110, pp. 337 343, 2022 Link identifier #identifier_person_3300-189Dettaglio
• GAFSI, NEDIA; BARLETTA, MASSIMILIANO, A Comparative Investigation of the Tribological and the Mechanical Behavior of Polyester Powder Coatings Filled with Graphite Depending on the Filling Percentage and the Size of the Graphite Particles, issn 2195-4356, pp. 252 258, 2021 Link identifier #identifier_person_84648-190Dettaglio
• BARLETTA, MASSIMILIANO, Production and processing of biodegradable and compostable biomaterials, issn 0167-2991, vol. 179, pp. 231 242, 2019 Link identifier #identifier_person_111578-191Dettaglio
• BARLETTA, MASSIMILIANO, Fuzzy model for fluidized bed assisted drag finishing, vol. 1648, pp. 1 4, 2015 Link identifier #identifier_person_101615-192Dettaglio
• BARLETTA, MASSIMILIANO, Fuzzy model for electrostatic fluidized bed coating, vol. 1, pp. 1 7, 2014 Link identifier #identifier_person_111779-193Dettaglio